SC 40RT
Maker: Scanjet
The SC 40RT is a dual or four nozzle externally driven automated tank cleaning machine constructed of 316 stainless steel and other highly corrosion resistant materials. It employs a patented magnetic drive transmission thus reducing the need for costly seal replacements and potential failures when used in hazardous environments. The drive mechanism and other major components are external to the tank, this results in easy maintenance and a high level of safety when the cleaning of hazadous products are required.
Key Features:
- Magnetic drive
- Rugged construction + External drive
- Easy maintenance + High jet impact
- Easy installation
- Adjustable speed
Typical applications:
-
Road and Rail Tankers
-
Ships Cargo Tanks
-
Barge Tanks
-
Reactors
-
Fermenters
-
Storage Tanks
-
Process Vessels
-
High Density Stock Chest
Contact via email: sales@tankcleantech.com
Contact via phone: +1 281.480.4041 and ask for the
Sales Department
General Specifications »
| Approvals and/or Conformities | DNV, ABS, GL, Lloyds, NK |
| Class | Rotating Jet-Head |
| Drive | External Turbine |
| External Surface Finish | ›25 ra µ microinch |
| Flow Range | 0-55 m3/hr) or 242 USGPM |
| Gear Ratio | 47/49 |
| Hygienic Design | No |
| Installation | Portable and Fixed |
| Jet Length Range (Radius) | 0-23 Meters or 0-76 Feet on the radius where the impact value is 700mm WC or better; longer jet lengths are achievable where the impact is less than 700mm WC |
| Lubricant | External Drive with sealed gearbox and oil/grease lubricated; wetted areas lubricated by media |
| Manufacturer | Scanjet |
| Manufacturing Quality | ISO9001 |
| Materials | 316LSS; PEEK; PTFE; Others |
| Maximum Length | 49 feet or 15 Meters Note: for lengths greater than 3500mm supports are required |
| Maximum Stages | 1 |
| Minimum Opening | 160mm or 6.29 inches |
| Pattern (Cycle) Time Range | 10 - 47 minutes |
| Pressure Range | 0-12 BAR or 0-175 PSIG |
| Programmable Cleaning Pattern | No |
| Spray Pattern | 360° |
| Standard Inlet Connections | 2.00" ANSI 150#; 3.00" ANSI 150#; DIN Flanges; Part A Camlock with Valve; others on request |
| Standard Mounting Flange | 6.00" ANSI 150#; 8.00" ANSI 150#; DIN Flanges; others on request |
| Temperature Range | 95°C or 160°F |
| Weight | 43 kg at 1500mm or 94.6 lbs. at 59"; per additional meter of pipe is 10 kg or 22 lbs. |
