Maker: Scanjet

The SC 40RE is an electrically driven external drive automated tank cleaning machine. Both 2 nozzle and 4 nozzle versions are available with all wetted parts constructed of 316 stainless steel and other highly corrosion resistant materials.

As none of the cleaning fluid is used to power the SC 40RE, the pressure drop across the machine is very minimal. As a result, the fluid energy from the cleaning supply pump is maximized. The SC 40RE is a very rugged and durable tank cleaning machine; designed for demanding cleaning applications where reliability and long service intervals are required.

Quality Standards

The SC 40RE is produced in accordance with ISO 9001 Quality Standards and our certificate of conformity and accreditation is available on request.

Key Features:

  • Externally Driven Electric Drive
  • Easy installation
  • Controllable rotation; with use of VFD (Variable Frequency Drive)
  • 2 & 4 nozzle design
  • Very low pressure drop
  • Quiet operation
  • CE rated
  • Self draining gun unit

Typical applications:

  • Ethanol storage and process tanks
  • Paints and coatings process vessels
  • Over-the-road tankers and railcars
  • Totes and IBC’s
  • Batch blending tanks
  • Large storage tanks

Get a price quote

Contact via email: sales@tankcleantech.com
Contact via phone: +1 281.480.4041 and ask for the Sales Department


General Specifications »

Approvals and/or Conformities
ISO 9001, DNV, ABS, GL, Lloyds, NK; CE Rating, ATEX, Class I Div 1
Class
Rotating Jet-Head
Drive
Electric
External Surface Finish
›25 ra µ microinch
Flow Range
0-58.6 m³/h (0-258 USGPM)
Gear Ratio
47/49
Hygienic Design
No
Installation
Primarily fixed installed, but in shorter lengths can be considered portable.
Jet Length Range (Radius)
0-79 Feet (0-24 Meters) Effective where impact value is 700mmWC or greater. Maximum jet length is approximately double the effective values stated.
Lubricant
None on the electric drive (sealed bearings); Media acts as lubricant on wetted parts of this machine.
Manufacturer
Scanjet
Manufacturing Quality
ISO9001
Materials
316LSS; PEEK; PTFE; Others
Maximum Length
49 feet or 15 Meters Note: for lengths greater than 3500mm supports are required. Split pipe arrangements are available for long lengths.
Maximum Stages
4; custom ordered and subject to down-pipe length
Minimum Opening
2 Nozzle Machine; 150mm or 5.91 inches
Pattern (Cycle) Time Range
14 minutes as standard; Variable with VFD(Variable Frequency Drive)
Pressure Range
0-175 PSIG (0-12 BAR)
Programmable Cleaning Pattern
No
Spray Pattern
360°
Standard Inlet Connection
2.00" ANSI 150# RF; PN16 DN50; Others on Request
Standard Length
60 inches (1500mm); Others on request
Standard Mounting Flange
6.00" ANSI 150# RF; PN16 DN150; Others on Request
Temperature Range
35°F-200°F(1.6°C-95°C)
Weight
80.3 lbs (36.5kg) for 1500mm length; 7kg or 15lb per additional meter of pipe