Maker: Scanjet

The SC 40RA is a dual or four nozzle externally driven (Pneumatic Drive) automated tank cleaning machine constructed of 316L stainless steel and other highly corrosion resistant materials. The drive mechanism and other major components are external to the tank, this results in easy maintenance and a high level of safety when the cleaning of hazardous products are required. As the Pneumatic Drive does not come in contact with the cleaning media, the SC 40RA will handle considerably more solids in the cleaning media than a conventional tank cleaning machine.  The SC 40RA can be used in portable and fixed applications.

Key Features:

  • Rugged construction + External drive
  • Easy maintenance + High jet impact
  • Easy installation
  • Adjustable speed on the fly and whilst in operation

Typical applications:

  • Road and Rail Tankers
  • Ships Cargo Tanks
  • Barge Tanks
  • Reactors
  • Fermenters
  • Storage Tanks
  • Process Vessels
  • High Density Stock Chest

Get a price quote

Contact via email: sales@tankcleantech.com
Contact via phone: +1 281.480.4041 and ask for the Sales Department


General Specifications »

Approvals and/or Conformities
ISO 9001, DNV, ABS, GL, Lloyds, NK; CE Rating, ATEX, Class I Div 1
Class
Rotating Jet-Head
Drive
Pneumatic (Air)
Drive Air Consumption
10.594 Cubic Feet Per Minute (300 Liters/Min)
External Surface Finish
›25 ra µ microinch
Flow Range
0-55 m³/h (0-242 USGPM)
Gear Ratio
47/49
Hygienic Design
No
Installation
Primarily fixed installed, but in shorter lengths can be considered portable.
Jet Length Range (Radius)
0-69 Feet (0-21 Meters) Effective where impact value is 700mmWC or greater. Maximum jet length is approximately double the effective values stated.
Lubricant
Lubricator on air drive inlet; media acts as lubricated on the wet areas of this device.
Manufacturer
Scanjet
Manufacturing Quality
ISO9001
Materials
316LSS; PEEK; PTFE; Others
Maximum Length
49 feet or 15 Meters Note: for lengths greater than 3500mm supports are required
Maximum Stages
4; custom ordered and subject to down-pipe length
Minimum Opening
160mm or 6.29 inches
Pattern (Cycle) Time Range
10 - 47 minutes; on the fly adjustable at drive head
Pressure Range
0-175 PSIG (0-12 BAR) "Fluid"
Pressure Range (Air)
0-145 PSI (0-10 BAR)
Programmable Cleaning Pattern
No
Spray Pattern
360°
Standard Inlet Connections
2.00" ANSI 150# RF; PN16 DN50; Others on Request
Standard Mounting Flange
6.00" ANSI 150# RF; PN16 DN150; Others on Request
Standard length
1500 mm (60 inches) and 2000mm (79 inches) Other lengths on request.
Temperature Maximum
203°F (95°C)
Weight
83.7 lbs. (38 kg) 1500mm length down-pipe; 22 lbs (10 kg) for each additional meter (3.2 feet) of pipe