SC 30T

Maker: Scanjet

The SC 30T is a single nozzle mechanically programmable automated tank cleaning machine constructed of 316 stainless steel and other highly corrosion resistant materials.  The SC 30T allows the operator to wash the tank in a full 360° mode or to set the nozzle angle to wash the tank within a particular section. The SC 30T also employs a patented magnetic drive transmission thus reducing the need for costly seal replacements and potential failures when used in hazardous environments. As the drive mechanism and other major components are external to the tank, this results in easy maintenance and a high level of safety when the cleaning of hazardous products are required.

Key Features:

  • Programmable
  • Magnetic drive
  • Section cleaning
  • Rugged construction
  • External drive
  • Easy maintenance
  • High jet impact
  • Easy installation
  • Adjustable speed

Typical Applications:

  • Ships
    • Crude Oil Tankers / Crude Oil Washing
      • AfraMAX
      • PanaMAX
      • SuezMAX
      • ATB’s (Articulated Tug and Barge)
      • Tankers
    • Chemical Tankers
  • Municipal Tanks
    • Storm Event
    • Water Runoff
    • Open Top
  • Road Tankers
    • Latex
    • Bitumen
    • Coal Tar

 


Get a price quote

Contact via email at: sales@tankcleantech.com

Contact via phone at: +1 281.480.4041 and ask for the
Sales Department


General Specifications »

Approvals and/or ConformitiesISO9001, DNV, ABS, Lloyds, GL, NK
ClassRotating Jet Head
Cleaning Pattern Times30 - 90 minutes; contact Tank Cleaning Technologies, Inc. for specific details on pattern times for this unit. The SC30T is a programmable unit and cleaning pattern times can be varied.
DriveExternal Turbine
Flow Range0-67 m3/hr (0-295 USGPM)
Hygienic DesignNo
Inlet ConnectionPN16 DN50; 2.00" ANSI 150# (Others on request)
Jet Length Range (Radius)0-34 meters (111.5 Feet) on the radius at 700mm WC impact value; maximum jet lengths are approximately double this range
Lengths1.5 meters to 15 meters (4.9 feet to 49.2 feet). Lengths over 3500mm may require supports.
ManufacturerScanjet
MaterialAISI 316, PFTE
Max temperature95°C (200°F)
Minimum Opening160mm or 6.299 inches
Mounting connecton or deck flangePN16 DN150; 6.00" ANSI 150#; 8.00" ANSI 150#; others on request
Pitch Variations1.5°, 3.0°, 4.5° and 60° Pre-Wash
Pressure Range0-175 PSIG (0-12 BAR)
Recommended Pressure8 BAR (116 PSI)
Rotation Speed0.5-1.6 RPM
Weight43 kg for 1500mm length (94.6 lbs. for 59 inches). Weight per meter or 3.2808 feet is 10 kg or 22 lbs.